THE CHARGERS

For the Power Belts and for the Power Packs we recommend the built-in charger of the series MB1000-xx. The battery charger of the series MB1000 are developped for worldwide use and are for recharge NiCad and NiMH batteries.
There are different models available.

 THE BUILT-IN CHARGER MB1000-xx

The built-in chargers MB1000 are automatic chargers with wide range input 85-264V, with automatic charging controll, automatic switch off, safety timer and trickle charge,  when the battery is recharged.  By the -V method the charger switches from normal charge to trickle charge, when the battery is total recharged. It is not neccessary to know the status of charge, before the battery will be recharged.

CODENO DESCRIPTION TYPE VOLT AC-INPUT VOLTAGE CHARGING    CURRENT TRICKLE -∆V SAFETY  TIMER (h)
5931036 BUILT-IN CHARGER MB1000-12 NiCd/NiMH -14,4V 85-264V 1Ah pulsed 9
5931037 TWIN-BUILT-IN CHARGER
 MB1000-12
NiCd/NiMH 2 x 14,4V 28,8V/30V 2 x 85-264V 2 x 1Ah pulsed 9
5931037 BUILT-IN CHARGER MB1000-20 NiCd/NiMH -26,4V 85-264V  1Ah pulsed 9

 

 

THE EXTERNAL CHARGER MB1000-xx for NiCd- and NiMH batteries

These approved charging electronics, which are built in the power belts, since several years, are also available as external chargers.
The battery chargers of the series MB1000 are for recharge NiCad (Nickel-Cadmium) and for NiMH (Nickel-Metall-Hydrid). There is a complete series of chargers available.

UNIVERSAL CHARGER MB1000-12 for battery 12V - 14,4V with XLR connector
TWIN CHARGER MB1000-12 for 2 x batteries 12V - 14,4V with 2 x  XLR connector
UNIVERSAL CHARGER MB1000-20 for battery >15V - 26,6V with XLR connector
TWIN CHARGER MB1000-20 for 2 x batteries >15V - 26,6V mit 2 x  XLR connector
TWIN CHARGER MB1000-12SR for 2 x batteries ARRIFLEX 16SR2
TWIN CHARGER MB1000-20 SR for 2 x batteries ARRIFLEX SR3
TWIN CHARGER MB1000-12NP for 2 x batteries SONY NP1 or  2 x batteries SONY BP-90

The TWIN CHARGER MB1000-xx  is two charging units in one housing, which have only a common AC input. If one charger ist out of order the second charging unit can be used to recharge a battery.
 

Specification for

MB1000-12, MB1000-20, TWIN MB1000-12, TWIN MB1000-20, TWIN MB1000-12SR,
TWINMB1000-12SR2, TWIN MB1000-20SR3 
TWIN MB1000-12NP

Housing:                     Aluminium-Profile Housing      
Charging-Method:     -D Voltage with additional safety timer         
Charging time max.:  4 - (11) h (factory adjusted)
Trickle charge:          pulsed trickle charge 10mAh
Special:                      electronic reverse polarity safety
LED green for:          charge, trickle charge, deep discharged, battery defect warning (by different LED flushing mode)
LED red for:              reverse polarity warning
 

CODENO DESCRIPTION TYPE VOLT AC-INPUT VOLTAGE CHARGING CURRENT TRICKLE -∆V SAFETY  TIMER (h) REVERSE POLARITY SAFETY CONNECTOR WEIGHT MAESUREMENTS (lxwxh)mm
5931152 UNVERSAL-CHARGER MB1000-12 NiCad/NiMH -14,4V 85-264V 1Ah pulsed 9 1 x XLR4 800g 168x110x54
5931153 UNVERSAL-CHARGER MB1000-12 NiCad/NiMH -14,4V 85-264V 1Ah pulsed 9 1 x XLR5 800g 168x110x54
5931154 TWIN-CHARGER MB1000-12 NiCad/NiMH 2 x -14,4V 2 x 85-264V 2 x 1Ah pulsed 9 2 x XLR4 950g 168x110x54
5931155 TWIN-CHARGER MB1000-12 NiCad/NiMH 2 x -14,4V 2 x 85-264V 2 x 1Ah pulsed 9 2 x XLR5 950g 168x110x54
5931159 UNIVERSAL-CHARGER MB1000-20 NiCad/NiMH 1 x -26,4V 85-264V 1 x 1Ah pulsed 9 1 x XLR4 800g 168x110x54
5931160 UNIVERSAL-CHARGER MB1000-20 NiCad/NiMH 1 x -26,4V 85-264V 1 x 1Ah pulsed 9 1 x XLR5 800g 168x110x54
5931161 TWIN-CHARGER MB1000-20 NiCad/NiMH 2 x -26,4V 2 x 85-264V 2 x 1Ah pulsed 9 2 x XLR4 950g 168x110x54
5931162 TWIN-CHARGER MB1000-20 NiCad/NiMH 2 x -26,4V 2 x 85-264V  2 x 1Ah pulsed 9 2 x XLR5 950g 168x110x54
5931158 TWIN-CHARGER MB1000-20SR3 NiCad/NiMH 2 x -26,4V 2 x 85-264V 2 x 1Ah pulsed 4 2 x SR3 950g 168x110x54
5931157 TWIN-CHARGER MB1000-12SR2 NiCad/NiMH 2 x -14,4V 2 x 85-264V 2 x 1Ah pulsed 4 2 x SR2 950g 168x110x54
5931168 TWIN-CHARGER MB1000-12SR2 NiCad/NiMH 2 x -14,4V 2 x 85-264V 2 x 1Ah pulsed 4 2 x 3-pin for accessory connector 950g 168x110x54
5931164 TWIN-CHARGER MB1000-12NP NiCad/NiMH 2 x -14,4V 2 x 85-264V 2 x 1 Ah pulsed 6 2 x NP-1 /
2x BP-90 connector
1300g 260x110x54

 

THE TURBO CHARGER TC10

The Turbo Charger TC10 is a fully automatic microprocessor controlled charger for recharge NiCad-batteries upto 24V nominal-voltage. The charging current is 8Ah upto 13,2V and 4Ah upto 24V.

The charging method is the reflex and the -Vmethod. The charger is for 230V AC input current. The advantage is a short recharge time (a 8Ah battery is recharged within 2,5 hours), recharge without knowledge of battery charge status and automatic switch of to trickle charge at 100% recharge.

TURBO-CHARGER TC10

LED for:  charge, end of charge, contact failure

CODENO DESCRIPTION BATTERY TYPE VOLT AC INPUT VOLTAGE CHARGING CURRENT TRICKLE -∆V SAFETY  TIMER (h) REVERSE POLARITY SAFETY CONNECTOR WEIGHT MAESUREMENTS (lxwxh)mm
5931141 TURBO-CHARGER TC10 NiCd 6-24V 230V 4Ah pulsed 156 1 x XLR4 1350g 200x180x100

 

SPECIFICATION SUBJECT TO CHANGE WITHOUT PRIOR NOTICE!