THE DEEP DISCHARGE ELECTRONIC

To protect the power packs/power belts against deep-discharge we have developped the deep-discharge protection electronic.
There are different types available:

 

THE ELECTRONIC CONTROL SYSTEM

THE ELECTRONIC TES (conventionel) for 24V and 30V power packs/power belts:

The electronic TES is provided with a prewarning option, which is visible by a red LED. The prewarning function is so adjusted, that approx. five minutes (at approx. 8Ah power consumption),  before the battery is discharged, the MULTI FUNCTION LED starts to blink. After five minutes the deep discharge protection starts to interrupt the light (contineously run from on to off). In this case the battery is discharged and the battery must be switched off!

THE ELECTRONIC TESVG (SMD)

The functions are similiar to the TES electronic. Additional functions are:

THE SOFT START AUTOMATIC

A built in soft start automatic reduces the starting current to prevent the bulb for primar surge.

THE PREWARNING

Approximately five minutes (adjusted at a power consumption of 8Ah) before the battery is discharged the Multi Function LED starts to blink. After five minutes the deep discharge protection interrupts the battery from outlet socket.

THE AUTOMATIC SWITCH OFF

To prevent the battery for deep discharge, the deep discharge protection electronic switches off the bulb.

 

DIMMER CONTROL VG-D FÜR 6V-14,4V, 24V UND 30V

THE ELECTRONIC TESVG-D (SMD) -DIMMER CONTROL-

This electronic has all the features of the TESVG electronic, but with the additonal feature of a DIMMER CONTROL. The DIMMER C̉NTROL enables to adjust the light intensity (between 25% and 100% of power consumption). In 25% mode there will be  approximately a four time longer running time. The power consumption of the electronic is approx. 50mAh.
Power packs or Power belts with Dimmer Control have 2 built-in connectors. Connector 1 is for camera equipment and is direct connected to the battery. Connector 2 is for lighting eqipment. The Dimmer Control is wired to connector 2. In case that connector 2 should be used additional for a camera or for other equipment, the Dimmer Control electronic can be switched off.